SOLD
For Sale: One Lot of Regulator Repair and Service Tools
Includes some low pressure inflator tools. These were purchased from Peterbuilt about 10 years ago. They have not been used, most are still in original plastic with instruction sheets. The same tools are now sold by Scubatools, (except calipers, they are now digital) with the same part numbers. You can get complete descriptions on their website.
I want to sell these as a lot.Purchased new today this would cost around $620.00.
I am asking $265.00 for all of them, shipping included to the lower 48 states. Or, make an offer!
Paypal payments.
Included:
Slotted Cap Driver
20-159-500
DUAL DRIVE INLINE ADJUSTING TOOL
20-500-200
GAUGE FOR DUAL DRIVE ADJUSTING TOOL
20-510-100
HP SEAT REMOVAL TOOL
20-141-400
1" YOKE NUT SOCKET
20-155-500
3" X 3/8 DRIVE EXTENSION
20-156-500
BREAKER BAR
20-157-500
THIN WRENCH
20-100-500
FIRST STAGE HANDLE, HEAVY DUTY, BRASS
20-115-100
GENESIS/SHERWOOD INFLATOR DUMP BUTTON T-TOOL
20-670-400
HP RESTRICTOR BULLET O'RING KIT, UNIVERSAL
20-144-400
GENESIS/SHERWOOD INFLATOR T-TOOL
20-660-200
HOSE PROTECTOR INSTALLATION TOOL
20-120-100
HOOK SPANNER SET, #3 THRU #6
20-410-200
FACE SPANNER, SMALL
16-075-500
FACE SPANNER, LARGE
16-077-500
ORIFICE/VALVE T-HANDLE
20-310-500
BAND SEALS, TEN PACK
26-300-450
O'RING PICK SET, 5 PCS. & STORAGE TUBE
10-125-400
OTC SNAP RING PLIERS
10-101-500
RETAINING RING PLIER .070 DIA. 90° TIP
16-070-500
HAKKO SIDE CUT, 5"
16-020-500
6" Dial Caliper
MAGIC RING PROSTAR X-LONG BALL TIP HEX SET - INCH
11-501-500

For Sale: One Lot of Regulator Repair and Service Tools
Includes some low pressure inflator tools. These were purchased from Peterbuilt about 10 years ago. They have not been used, most are still in original plastic with instruction sheets. The same tools are now sold by Scubatools, (except calipers, they are now digital) with the same part numbers. You can get complete descriptions on their website.
I want to sell these as a lot.Purchased new today this would cost around $620.00.
I am asking $265.00 for all of them, shipping included to the lower 48 states. Or, make an offer!
Paypal payments.
Included:
Slotted Cap Driver
20-159-500
DUAL DRIVE INLINE ADJUSTING TOOL
20-500-200
GAUGE FOR DUAL DRIVE ADJUSTING TOOL
20-510-100
HP SEAT REMOVAL TOOL
20-141-400
1" YOKE NUT SOCKET
20-155-500
3" X 3/8 DRIVE EXTENSION
20-156-500
BREAKER BAR
20-157-500
THIN WRENCH
20-100-500
FIRST STAGE HANDLE, HEAVY DUTY, BRASS
20-115-100
GENESIS/SHERWOOD INFLATOR DUMP BUTTON T-TOOL
20-670-400
HP RESTRICTOR BULLET O'RING KIT, UNIVERSAL
20-144-400
GENESIS/SHERWOOD INFLATOR T-TOOL
20-660-200
HOSE PROTECTOR INSTALLATION TOOL
20-120-100
HOOK SPANNER SET, #3 THRU #6
20-410-200
FACE SPANNER, SMALL
16-075-500
FACE SPANNER, LARGE
16-077-500
ORIFICE/VALVE T-HANDLE
20-310-500
BAND SEALS, TEN PACK
26-300-450
O'RING PICK SET, 5 PCS. & STORAGE TUBE
10-125-400
OTC SNAP RING PLIERS
10-101-500
RETAINING RING PLIER .070 DIA. 90° TIP
16-070-500
HAKKO SIDE CUT, 5"
16-020-500
6" Dial Caliper
MAGIC RING PROSTAR X-LONG BALL TIP HEX SET - INCH
11-501-500





Last edited: