Small rust spot on new steel tank. What to do?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Ares1590

Registered
Messages
24
Reaction score
19
Location
Texas
# of dives
25 - 49
Just got a new faber LP85 hot dip tank. It had a small rust spot. Not sure what to do. Based on what I’ve read the best option may be to sand down and hit it with that ZRC cold galvanizing spray.

Any other tips/suggestions on what to do ?
Photos attached.
 

Attachments

  • IMG_2078.jpeg
    IMG_2078.jpeg
    261.2 KB · Views: 32
  • IMG_2077.jpeg
    IMG_2077.jpeg
    249.8 KB · Views: 27
Umm… dive it? :)

Seriously, these are industrial-grade cylinders. It will outlive you, even with its flaws…

ETA: here’s a tank I bought. Cleaned off the corrosion. Hydroed it: passed just fine. Do not worry about such microscopic details…


ETA2: Rereading this, I may have come off condescendingly. That was not my intention. You’ll notice that in that thread above I was the one asking if my tanks were too damaged to be used, and everybody told me everything was fine: clean them up and use them. Of course, those tanks were slightly more corroded than what you’re showing us… :-)

So I get it: brand new tanks and you’re worried. The point is: scuba tanks can take an unbelievable amount of abuse, and hot dipped galvanized like yours even more so. They will be fine. And for the record, that is most likely not really rust of your tank. It very well may have been something that rubbed onto your tank and rusted on the surface. But either way, the tanks are fine. :-)
 
Umm… dive it? :)

Seriously, these are industrial-grade cylinders. It will outlive you, even with its flaws…

ETA: here’s a tank I bought. Cleaned off the corrosion. Hydroed it: passed just fine. Do not worry about such microscopic details…


ETA2: Rereading this, I may have come off condescendingly. That was not my intention. You’ll notice that in that thread above I was the one asking if my tanks were too damaged to be used, and everybody told me everything was fine: clean them up and use them. Of course, those tanks were slightly more corroded than what you’re showing us… :-)

So I get it: brand new tanks and you’re worried. The point is: scuba tanks can take an unbelievable amount of abuse, and hot dipped galvanized like yours even more so. They will be fine. And for the record, that is most likely not really rust of your tank. It very well may have been something that rubbed onto your tank and rusted on the surface. But either way, the tanks are fine. :-)
Just got a new faber LP85 hot dip tank. It had a small rust spot. Not sure what to do. Based on what I’ve read the best option may be to sand down and hit it with that ZRC cold galvanizing spray.

Any other tips/suggestions on what to do ?
Photos attached.
Umm… dive it? :)

Seriously, these are industrial-grade cylinders. It will outlive you, even with its flaws…

ETA: here’s a tank I bought. Cleaned off the corrosion. Hydroed it: passed just fine. Do not worry about such microscopic details…


ETA2: Rereading this, I may have come off condescendingly. That was not my intention. You’ll notice that in that thread above I was the one asking if my tanks were too damaged to be used, and everybody told me everything was fine: clean them up and use them. Of course, those tanks were slightly more corroded than what you’re showing us… :-)

So I get it: brand new tanks and you’re worried. The point is: scuba tanks can take an unbelievable amount of abuse, and hot dipped galvanized like yours even more so. They will be fine. And for the record, that is most likely not really rust of your tank. It very well may have been something that rubbed onto your tank and rusted on the surface. But either way, the tanks are fine. :-)


No worries ! Appreciate the info.
 
A little bit of vinegar will remove most of the surface corrosion. I echo the other members, those tanks last forever. My 50s are scratched from the caves, still gtg. Mostly going to be a cosmetic issue.
 
And here I was putting clear nail polish on all my spots when we first got them :).

We love those steel tanks and a few spots and blemishes just add character!!
 

Back
Top Bottom