Sherwood ID

[dsenloe]

Can someone tell me what model or series of Sherwood first stage has the large two diameter stepped piston and large end cap? The reg is an oasis that was purchased new in 1989/90 and I am trying to fine another one just like it. PS: A diagram would be good too hint hint Thanks Scott

 

[Fishpie]

I think it is a SRB 380.
I have at least half a dozen of these 1st stages.....probably the best performing 1st stage Sherwood has produced (at least before the introduction of the SR1).
They come up on eBay quite often.....they come coupled with the Ultima 2nd stage (Poseidon Jetstream) and the Oasis+ (not the regular Oasis).

 

[Couv]

The Sherwood SRB3800 regulator diagrams can be found here.

http://www.frogkick.dk/manuals/sherwood/Discontinued%20models/

 

[dsenloe]

Yep, that is the one, thanks for your help. Scott

 

[MR12111]

I think it is a SRB 380.
I have at least half a dozen of these 1st stages.....probably the best performing 1st stage Sherwood has produced (at least before the introduction of the SR1).
They come up on eBay quite often.....they come coupled with the Ultima 2nd stage (Poseidon Jetstream) and the Oasis+ (not the regular Oasis).

... Hello .. Any chance you'd want to sell one of the SRB 3800"s you have .. 1st stage .. I had one years ago and liked it .. Used it with my Mares MR 12 second stage ..the mares type seats blew out to often .. This Sherwood had replaceable seats but really never gave me any problems ... Do you know if there are parts available for these anymore ? The Filter in the piston clogging was the only possible problem but if you'r careful not to get water in there it will be fine ..
I see your in Ft Lauderdale ... I ran the Divers Unlimited Boat for a short while ..
Thank You for any help/advice you can give me .. Don J ..