Sherwood HP 100 Specs?
- Thread starter Deuces
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Leadking
Contributor
Asahi
Sherwood SCUBA rep.
Contributor
HP103 @ 3500psi Bouyancy full -11.5 Bouyancy 500 psi -4.4
divinginn
Contributor
welcome sherwood,nice to have another manf. rep here.
cummings66
Contributor
Is this true of all Sherwood HP100's or just the new ones?
I think just the new ones, because I'm fairly sure I saw an older (skinny neck) Sherwood HP100 a local shop was selling used that was made by PST.cummings66:
pescador775
Contributor
- Messages
- 2,652
- Reaction score
- 12
My understanding is the Asahi tank is -5.2 empty. At least, so says XS Scuba. What is the finish on that tank, metallized zinc? Also, is this Asahi tank still manufactured from pipe, necked and plugged? A bit longer than the PST tank. Just curious. DIN valve is required. The older Sherwood HP tanks were manufactured by PST, also rated 3500/DIN.
Sherwood SCUBA rep.
Contributor
Material: Chromium Molybdenum Steel
Constuction: Spun
Inlet thread : 7/8 -14 UNF-2B
Finish: Interior Shot Blast
Exterior: Shot balst- Zinc Spray Coating- Powder Paint
working Pressure 3500 psi Full- -11.5 500 psi -5.2
Constuction: Spun
Inlet thread : 7/8 -14 UNF-2B
Finish: Interior Shot Blast
Exterior: Shot balst- Zinc Spray Coating- Powder Paint
working Pressure 3500 psi Full- -11.5 500 psi -5.2
Similar threads
