recyclingfreak
Registered
Does anyone know where to find a service manual or guide for servicing an Aqualung Titan 1st and 2nd stage. It's for 2010 or later. Thanks so much
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Mine looks very similar but it's not the LX. Are the internals the same?
If you have any mechanical prowess at all then the older manual will do just fine. All you really need in addition to that is the schematic for the newer model. Same working bits, same order of operations. I believe the torque specs for their respective bits is even the same. In fact the real difference is you don't have to shove the springloaded HP side of the reg down it's throat which I always thought was the trickiest bit.
That's good news. I'm mechanically inclined and I do have the schematic for the newer one but not the guide but I do have a guide for the older oneIf you have any mechanical prowess at all then the older manual will do just fine. All you really need in addition to that is the schematic for the newer model. Same working bits, same order of operations. I believe the torque specs for their respective bits is even the same. In fact the real difference is you don't have to shove the springloaded HP side of the reg down it's throat which I always thought was the trickiest bit.