i just bought (like 4 days ago)the seamaster pro ex which is an mm2ex camera w/ a 60ttl strobe. i took it to about 30 feet and the film jammed up on me. i rewound it on the surface. when i got home i put in 36 exp roll, and kept pressinfg the shutter with the back door open and it worked fine, but when i sealed the cmaera it would get to about 15 exposures and stop winding. upon further examination it turns out that the pressure plate is putting too much pressure on the film. should i just remove the plate? id send the unit back but im going to cozumel saturday and i need the camera. also i kept rewinding the film and presin the shutter and now it gets through rolls with no problem even with the door closed. r there some films that u shoulnt use? could it have been the film and not the camera?
ps- ive been thinkin bout sellin this camera and getting the nikon n80 and the sea&seanx80 housing, anybody have any experience with it? anbody want to buy my mm2ex after it comes bacj from the factory?
ps- ive been thinkin bout sellin this camera and getting the nikon n80 and the sea&seanx80 housing, anybody have any experience with it? anbody want to buy my mm2ex after it comes bacj from the factory?