Scratches on computer display screen

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

lars2005

Contributor
Messages
71
Reaction score
0
Anyone have any tried and trusted means of removing scratches from the face of the dive computer display screen. In this case and UWATEC??
 
nope, the key is to use something like a ZAGG screen protector to prevent scratches in the 1st place.
 
If you put clear packaging tape over it (sort of like a retrospective screen protector) it masks existing scratches pretty effectively.

At least it did on my Suunto D9.

For obvious reasons, make sure you trim the tape very carefully.
 
  • Like
Reactions: Jax
tooth paste will polish plastic very nicely.
try it on some scrap plastic first.
 
Your local auto parts store should have a number of products intended to clear scratches from plastic (such as headlight housings).
 
Brasso for minor scratches.
Automotive headlight restoration kit for more serious stuff.
All require large amounts of "thumb grease".
 
I suppose you could polish them out with one of the above suggestions, but don't the scratches disappear underwater? Mine do.

-Charles
 
Depending on the model, you might be able to just replace the screen. Replacements for the Tec 2g screen can be had from LeisurePro for about $10.
 

Back
Top Bottom