Reg soaked with open port - need service?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Oh, just the inflator hose?

Then no worries, the inflator hose has a Schrader valve on the quick-disconnet side (the same in bicycle tubes and similar to car tires), so no water will seep into it. I usually soak my regs with the inflator hose disconnected.

A more common thing is forgetting to close the dust cap or the second stage immersed with the purge button pressed.
I think he had disconnected a borrowed hose from the first stage.
 
Something similar happened to me, I stupidly rinsed my regs with the dust cap off. Thankfully, it was with tap water so chlorine/chloramine and fluoride vs. salt and other nasty things. I put my regs back onto a tank, and purged them for a good minute.

So far, my IP is stable at 142psi(Mares specs a higher than usual IP) with crisp lockup. No verdigris in the inlet filter.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom