Quick Disconnect Install
- Thread starter saying
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
rescuediver009
Contributor
God no!
If you figure that your HP is about 30 times more pressure that your HP. Therefore it needs a little more torque. This is one of those things that is difficult to describe without a visual demonstration. I would say tighten it about 1/4 to 1/3 less than as tight as it would go with a really stubby wrench so you don't get too much torque. That is not to say tighten it all the way and back off......
If you figure that your HP is about 30 times more pressure that your HP. Therefore it needs a little more torque. This is one of those things that is difficult to describe without a visual demonstration. I would say tighten it about 1/4 to 1/3 less than as tight as it would go with a really stubby wrench so you don't get too much torque. That is not to say tighten it all the way and back off......
Similar threads
