Anyone got any good sources to get a pull tab on my Jet Fins? I tried putting a ziptie, but it doesn't have the leverage that I need.
Pull tab for Jet Fins...
- Thread starter Manatee Diver
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Ulfhedinn
-Skill Collector-
I use something made from this from time to time.
Bungee Cord Piranha Dive Shop |
--
Do you have the spring straps or the standard straps?
Bungee Cord Piranha Dive Shop |
--
Do you have the spring straps or the standard straps?
runsongas
Contributor
Can mod the zeagle tabs on if you want. Or just go with the bungee.
Paging @MaxBottomtime
He's got a few good pics of bungee he's used for fins....when I get around to it I want to give it a go.
He's got a few good pics of bungee he's used for fins....when I get around to it I want to give it a go.
I use bungee on my Jets and pull tabs that I take off of other fins, I posted something about the bungee installation a while back.
MaxE
Contributor
Trident make and sells some, I'll have to dig for the part number. Any shop should be able to order them, I think they were like $13 each. When I was in the same boat I also reached out to deep6 to see if they had any extra, they did in orange. The price they quoted me was less and they were nice enough to send me a pair.
OP
MaxE
Contributor
The Trident part is on Page 331 of the catalog and has a part number: "R557-RUBBER"
OP
MaxE
Contributor
Possibly I was just going off of the 2021 catalog that Trident has online.
Similar threads
