Part source for cap on D300

[jacked_72]

I'm looking for the plastic cap for the D300 secondary regulator. It is removed with the SP tool using the wide spaced pin spanner. It cracked at the threads, probably where a tech over tightened it. My LDS says that the parts are no longer available from SP. From what I can tell it is part no. 11-011-115 and it is simply called "cap" in the parts schematic. Perhaps there is shop with a cache of old parts laying around?

Jim

 

[DA Aquamaster]

The D300 used a different case and thus a different cap than some of the D350s (my understanding is the change occurred in mid D350 production) and the D400, so the latest caps won't work.

I don't have any of the D300 caps.

 

[SCUBAPRO Harry]

Unfortunately, we have not had stock in this cap in 2-3 years. Best option is to find another D300 on Ebay for parts.