scuba127
Contributor
Does anyone know if Oxcheq wings will work with OMS backplates and OMS Low Profile, Lightweight Single Tank Adaptor? Thanks in advance.
OMS Backplate with Oxcheq Wing
- Thread starter scuba127
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
TN Traveler
Contributor
If you are going to use a STA - the wings will work - all have the standard 11" spacing on the grommet holes.
If you are using an Oxycheq single tank wing, save yourself the money and skip the STA, because of the wing's design you don't need it.
Yup, no STA needed. Tank stays put nice and tight.
Cheers,
Cheers,
Randy43068
Guest
- Messages
- 5,461
- Reaction score
- 132
- # of dives
- 100 - 199
nice-tight and in place is the best
I've dove my Oxycheq 30# with my OMS plates without a STA but prefer to use the Oxycheq Mini STA. Still a nice tight config but setup and breakdown is a bit faster than threading the tank straps. I did try to use my OMS STA and found it to be too tight a fit on the studs of the STA.
Similar threads
