mclir9
Guest
Do I need to adjust the FO2 on this computer if I am diving standard (no nitrox mix)?? If I have it setup to start working upon entering the water automatically I should be good to go with the factory settings correct??
Oceanic Veo 180 Wrist Computer
- Thread starter mclir9
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
GrumpyOldGuy
Contributor
Yes, the factory settings are air. It also reverts to air when it shuts off 24 hours after your last dive.
The only trick I found is there is a mode to revert to 50% F02 if you are diving multiple nitrox mixes the same day and forget to punch in the mix on the subsequent dives. It is supposed to be a safety feature. You can turn this off, then once you punch in the F02, it stays in until the computer shuts down 24 hours after you last dive.
The only trick I found is there is a mode to revert to 50% F02 if you are diving multiple nitrox mixes the same day and forget to punch in the mix on the subsequent dives. It is supposed to be a safety feature. You can turn this off, then once you punch in the F02, it stays in until the computer shuts down 24 hours after you last dive.
GrumpyOldGuy
Contributor
Similar threads
