O2 Bottle

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

mweitz

Contributor
Messages
754
Reaction score
0
Location
San Carlos, CA
# of dives
200 - 499
I recently purchased a used O2 kit, and am unsure of the bottle size. It is marked as follows:

CTC/DOT-3AL2015D387782LUXFER 05^90

I has a newer Hyrdo, so I'm OK there. Anyone know the size of this bottle?

Thanks,

Mark
 
Is it about 16.5" high and 4.375" diameter? If so it's 13.7 cf.
 
I'll check when I get home. I have a couple of 13's and it is the same diameter, but a bit taller. The 13's are 3000PSI and the O2 bottle is 2000 PSI.

Mark
 
Cool, thanks. I bet that is it!

Mark
 
Just make sure not to use this with a bungied wing. If the bungie cord fails, it could detonate your O2 tank...
 
Thanks Tom.

Do you have any hints on O2 cleaning the plastic tubing and mask? :wink:

Mark
 
https://www.shearwater.com/products/teric/

Back
Top Bottom