My Oceanic Transmitter doesn´t work!
- Thread starter rick90
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
I would double check the transmitter code (printed on the transmitter) and make sure the same number is entered into the VT-3. I think this is done in the SET U menu (sorry I dont have my computer with me right now to confirm). Anyway, if the computer is new to you and you have been surfing around in the menus it is easy to accidentally get into this menu and change a number by accident.
Best of luck and if all else fails call Oceanic Tech Support. I have always had great expereinces talking with them and they are very helpful.
SS
Best of luck and if all else fails call Oceanic Tech Support. I have always had great expereinces talking with them and they are very helpful.
SS
seabel
Guest
have you read the manual ??? never ever ever dive with a computer that you don't know how to operate forwards and backwards EVER!!!
From the lack of information do you have a tank with pressure that your regulator is pressurized too? You do need tank pressure to get a reading.
- Messages
- 245
- Reaction score
- 31
- # of dives
I had one just stop working too....changed battery, tried with three oceanic computers..opened it up, dry as a bone. Ideas welcome !
Hi. Try entering your serial number from your transmitter in the opposite way. I entered mine one way 6 was actually a nine, get my meaning. I did this and it worked like a charm. Good luck
Similar threads
