Mares Quad computer wont work underwater.

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Messages
1
Reaction score
0
Location
Fuerteventura
# of dives
200 - 499
My Mares quad show surface display, but doesn't change on entering the water. I've tried a new battery, and checked the settings, but it doesn't seem to switch to dive mode when submerged. Any ideas or suggestions ??
 
dead wet sensor probably.
 
From the manual:

pre-dive (Quad Air is on the surface but actively monitoring ambient pressure, so that it can begin to calculate a dive the instant it is submerged below 1.2m/4ft)

Try diving below that depth? 💻
 

Back
Top Bottom