Mike Juren
Registered
- Messages
- 17
- Reaction score
- 0
would anyone have a service manual for this regulator?
Thank you, Mike J
Thank you, Mike J
Mares LE regulator
- Thread starter Mike Juren
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Might take a look at this thread: http://www.scubaboard.com/forums/regulators/251067-looking-mares-mr42-service-manual.html
OP
Mike Juren
Registered
- Messages
- 17
- Reaction score
- 0
Thank you for your reply!. It's funny, this was my first and only post, and you actually told me how to do it, and you are also the only one responding.
I have the manual for the 42. It is very similar, but there is 1 major difference which I am not able to resolve yet. The 42 is a unibody reg, whereas the LE also has a screw coming in from the side. It has a snap ring on it, and an o ring on the inside. I can't figure out what it's for and if it's positioning means anything. The rest of the reg is easy to service as it is basically the same as other |Mares regs.
Mike
I have the manual for the 42. It is very similar, but there is 1 major difference which I am not able to resolve yet. The 42 is a unibody reg, whereas the LE also has a screw coming in from the side. It has a snap ring on it, and an o ring on the inside. I can't figure out what it's for and if it's positioning means anything. The rest of the reg is easy to service as it is basically the same as other |Mares regs.
Mike
Similar threads
