Magnehelic Gauge Mouthpiece adapter

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Am I right in assuming that you draw breath through the mouthpiece whilst monitoring the reading on the gauge?
Yes just sipping, monitor your IP gauge when it just dips take the ready, do it a few times and take the average of the readings.
 
Total hijack, sorry.

But why use a magnahelix vs. a digital diferential manometer?
With a pump (Regulator test rig you don't need to suck.), a digital gauge would work fine. With your mouth, there's just too much flicker for digital to let you see the cracking moment.
 
With the data trace on you should be able to easily identify the peak negative pressure just before the valve cracks open and the pressure increases. Right?
 
So the side fitted tube is connected to the gauge, the pressure used to crack it is then from the end fitting, which you are using a vac pump on but you could just suck? Thanks
Correct.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom