Leonardo cressi issues

[drewmeister_sd]

Greetings. I am using a Leonardo cressi for the first time. I am very concerned. It seems to be way too conservative. Today first dive 84 ft for just a few minutes, most of dive spent at 50-60 feet. Cressi indicated a 1 min decon stop at 36 feet plus 3 min 10-20 stop. Both done. No others in 12 person group needed 36' stop. After SI of 1.5 hours, dove to 61' for a couple min, spent next 45 at 40'. Cressi required a 10 min stop at 10'. All 7 others in group with computers needed 3 min and they were all deeper than me. How should I set this up to be more realistic ? PO was 1.3 now set at 1.2, SF was 0 now 1, altitude 0 (in ocean). Any help is appreciated.

 

[buton]

Thats weird i have used the Leonardo on three dives daily to 60 feet for 3 days and no problems at all

 

[00wabbit]

Do you have the optional deep stop turned on? It can be turned of in the settings screen.

Also the Leo isn't a deco computer so if you are getting close to NDL you should head up and not go into deco with it.

 

[Arturo]

If the computer requested a 1 min deco stop at 36 feet it´s because you have the Deep Stop option ON. Deactivate it and try again.

 

[drewmeister_sd]

Thanks everyone. I turn the deep stop off. It is still very conservative (not a bad thing) but very workable now. OOwabbit, that is exactly what I did once I set up the Leonardo more to my liking.