IST Saturn BCD - Inflator repair

[unemployed.com]

Hello All,
Just purchased this BCD on ebay and I want to re-build/clean the inflator. There is a small flathead screw that holds in the inflator assembly, I have loosened it but it just freely spins and I'm not sure how to pop out the inflator button?
I don't want to damage it by figuring it out so I thought I'd ask first.

https://www.dropbox.com/s/4196ho55bs0izx2/P1010118.JPG?dl=0

 

[Couv]

Hi Unemployed,

I was not able to view the picture, however most standard inflators are very similar. Here is a link to a video you may find helpful. https://www.youtube.com/watch?v=9Jb7O0DLde0

You can find most of the parts you need (including an entire inflator assembly for $15 USD) at Dive Gear Express https://www.divegearexpress.com/bcd-parts-and-components

 

[undrwater]

I can see the picture. It looks like a pin to hold the pull dump cable. Is there anything on the other side?

Something to push it out?

 

[unemployed.com]

No, nothing that I can see. After checking the condition of the dump valves I found that the springs are entirely rusted through and snapped as soon as I touched them. I read about a recall somewhere so I am just going to order new generic dump valves and an inflator and go that route.
Thanks for the help.