coldstroke
Guest
Have SP reg and Knighthawk BC with Air2. Need an intermediate pressure guage. Can you set me in the right direction. Generic one doesent fit the LP hose connection.
IP guage for SP Knighthawk
- Thread starter coldstroke
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Peter_C
Contributor
Use a standard hose in place to check the IP.
Is there a problem?
Is there a problem?
OP
coldstroke
Guest
I think I need a Scubapro-specific one.
Get an adapter. Trident sells them. They make 2 kinds. One to convert standard to Air2 - the other air2 to standard. Trident has a dive shop locator.
link: http://www.tridentdive.com/Export18.htm
link: http://www.tridentdive.com/Export18.htm
Peter_C
Contributor
Again, what are you trying to do?
You can buy an adapter which would keep you from having to remove a hose.
Or you can use a standard inflater hose and screw it into the first stage. A hose is $15. The adapter is probably the same if not more. You could probably buy a used hose from the for sale section of this board or ebay. At least the hose could serve multiple uses. It is not like you need to check pressure or creep that often.
You can buy an adapter which would keep you from having to remove a hose.
Or you can use a standard inflater hose and screw it into the first stage. A hose is $15. The adapter is probably the same if not more. You could probably buy a used hose from the for sale section of this board or ebay. At least the hose could serve multiple uses. It is not like you need to check pressure or creep that often.
OP
coldstroke
Guest
Thank you,gentlemen! Ed
Similar threads
