Installing a manifold

[jefffalcone]

I am trying to double up a set of LP 95s and I wanted to ask if there is anything I should know before I attempt it. I basically know nothing about it, but it seems simple enough. Bassically I would think you just slowly empty the air from the tanks, take off the old valves, and install the new ones.

Does anyone have a link step by step instructions?

Do I need to worry about shops giving me trouble about the visual inspections? I know that they like to try to make you get a new vis anytime the tank is completely emptied.

Thanks in advance. You guys usually have me straightened out in about 1 or 2 posts.

I know this has probably been asked, but I never come up with anything usefull when I use the search function, and I know someone can point me in the right direction.

Thanks again,
Jeff

 

[do it easy]

Here's a link to get you started

doubles


I searched for "assembling doubles" in the tank forum and a few threads popped up- this link was in one of them

 

[jefffalcone]

Thank you.

Like I said, I'm a bonehead with the search function.

 

[do it easy]

I was bored, so here's another link:

I think this assumes a different method (spin the last tank onto the valve!)
http://www.scubaboard.com/forums/te...213458-manifold-band-spacing.html#post3265889