Info needed on poseidon jetstream

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

no worries
https://www.globalunderwaterexplorers.org/equipment/config
If you go there you can see pictures of the Apeks DS4 setup on doubles which is what the Tek3's would look like, and you can also see what the DST's would look like though they are using MK25's for that. A pair of DST/XTX50's with a simple SPG is what I would recommend. Cheaper in the long run, but make sure your LDS will give you hoses other than the standard sizes so you don't have to buy full hose kits.
 
depends, but the GUE hose length guide is pretty accurate.
https://www.divegearexpress.com/regulators/index_hoses.shtml
I prefer a few different hose lengths, mainly on the primary side as I use something similar to their "streamlined" OW kit which is what I would recommend for a new diver.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom