Inflator
- Thread starter crdiver2
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
There can be differences in attaching the whole assembly to the bladder, but swapping just the inflator is usually relatively easy.
I had the Genesis version of the Outback for a while before selling it to a co-worker, and I have the Scubapro version of a Rec Wing that I use as a cold water singles wing. Both use a standard 1" diameter corrogated inflator hose, so you should be able to interchange the two inflators.
Some inflators use a small pin to capture a cable for a shoulder dump while others use a larger diameter pin, but most pull dumps have a cable with a loop large enough to accommodate either.
I had the Genesis version of the Outback for a while before selling it to a co-worker, and I have the Scubapro version of a Rec Wing that I use as a cold water singles wing. Both use a standard 1" diameter corrogated inflator hose, so you should be able to interchange the two inflators.
Some inflators use a small pin to capture a cable for a shoulder dump while others use a larger diameter pin, but most pull dumps have a cable with a loop large enough to accommodate either.
Similar threads
