Identifying Valves

[Griffo]

Hi,
I'm trying to identify a set of Diverite valves and manifold that are installed on a twinset I picked up. I believe that they are the 232bar modular system, but they don't appear to have any identifying marks on them. I need to get the port plugs and din inserts - i'm told that there are different port plugs depending on the model.

On the front of the valves, it says Diverite.
On the back is marked 39-03 on both valves, and 27-03 on the crossbar. Apart from that I can't see any marks.

Do those numbers identify what model they are?

Thanks

 

[Dive Rite]

Hi,
I'm trying to identify a set of Diverite valves and manifold that are installed on a twinset I picked up. I believe that they are the 232bar modular system, but they don't appear to have any identifying marks on them. I need to get the port plugs and din inserts - i'm told that there are different port plugs depending on the model.

On the front of the valves, it says Diverite.
On the back is marked 39-03 on both valves, and 27-03 on the crossbar. Apart from that I can't see any marks.

Do those numbers identify what model they are?

Thanks

View attachment 129511View attachment 129509View attachment 129510

Hi Oz,

[FONT=Helvetica,Arial,sans-serif][FONT=Helvetica,Arial,sans-serif]The plugs are universal on all our modular valves and manifolds that have the double o ring seal for the plug. The DIN inserts for 200/232 are universal as well.
The changes over the years have been design, early models had exposed burst disc plugs, current models are protected. The other change was the crossbar length. These have fluctuated over the years due to cylinder sizes and s/s bands so don’t interchange crossbars from earlier models. Part numbers you need are[FONT=Helvetica,Arial,sans-serif][FONT=Helvetica,Arial,sans-serif] # VA2506R, VA2506L, and 2 VA2555[/FONT][/FONT].

Cheers,
Kathleen

[/FONT][/FONT]

 

[Griffo]

Thank you!

Cheers

John