i need help to find a part to fill my din tank

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

sean_dahlberg:
thanks guys im going to try the adapter, and if it doent work ill get a new valve.
thanks for the info
sean

In the early days of Din valve there were two thread types (one non standard manufacturer?) with tiny difference causing some problems.. If your one is old, be sure to check the treads fit properly! With "markfm" modell there should be no problem. The other looked like to be used to connect DIN200bar bottle to yoke regulator and that cannot be used with 300bar.. (BRAS TO FILLINGSTATION, chrome to saltwater)
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom