OP
I've had my canister light now for more than a year. I'd like to do a burn test but I understand that running a lithium battery to zero can damage it. What's the best way to do this?
How to test burn time on a lithium battery without damaging it?
- Thread starter dray_gnv
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
The battery has protection circuitry in it for deep discharge, low voltage, high current, etc. so it will shut down if it is near completely discharged. However, you need to know if it will automatically reset when charged or if there is some procedure required to wake it up again. Obviously, you want to know this before a burn test.
Every time you charge a lithium battery to "full" or discharge it, you're shortening the life a smidge.
You should still burn test your batteries once a year.
You should still burn test your batteries once a year.
Similar threads
