How long should the inflator hose be for my 36# wing?

[Mo2vation]

just curious. The LP Inflator didn't arrive with the wing - its being shipped, but I need to run out and pick one up. I spaced and forgot the wing at home :bonk:

I'm diving a single, no STA, etc. Thanks -

Ken

 

[Dryglove]

Mo2vation once bubbled...
just curious. The LP Inflator didn't arrive with the wing - its being shipped, but I need to run out and pick one up. I spaced and forgot the wing at home :bonk:

I'm diving a single, no STA, etc. Thanks -

Ken

My halcyon pioneer setup came with a 22" hose for the inflator

 

[daylight]

The inflator hose is normally 15". Did they ship short just the hose or both the inflator and hose?
Larry

 

[MechDiver]

The LP hose that came with my Pioneer is longer than what came with my Explorer, as is the corrugated inflator hose. Seems like 15" for the Pioneer would be too short, but I don't have either with me.

MD

 

[Mo2vation]

The LP inflator hose (from 1st stage to Power Inflator gun) is not. The guy simply short shipped - its on the way, but I need it tomorrow or I'm sunk. His shipment won't get here until next week.

I've been diving the AirSource with its proprietary hose (thank you very much, SeaQuest...) so I can't use it...plus I think its way too long (big loop over the shoulder, etc.)

I believe the Pioneer 36# wings have a shorter currugated hose, so it makes sense I'll need a shorter LP hose. I just need to know how short.

If one of you'd be kind enough to measure your LP, I'd appreciate it. I need to pick one up tonight.

K

 

[WreckWriter]

Call and ask. I can't answer as I don't have a Pioneer. 22" sounds right though.

WW

 

[Wendy]

22"

 

[Dryglove]

Mo2vation once bubbled...
The LP inflator hose (from 1st stage to Power Inflator gun) is not. The guy simply short shipped - its on the way, but I need it tomorrow or I'm sunk. His shipment won't get here until next week.

I've been diving the AirSource with its proprietary hose (thank you very much, SeaQuest...) so I can't use it...plus I think its way too long (big loop over the shoulder, etc.)

I believe the Pioneer 36# wings have a shorter currugated hose, so it makes sense I'll need a shorter LP hose. I just need to know how short.

If one of you'd be kind enough to measure your LP, I'd appreciate it. I need to pick one up tonight.

K

Hmmm i must be invisible today. The low pressure hose on my halcyon pioneer 36lb setup is 22 inches.This is the hose that was included from halcyon for this set up.And yes i measured to be sure.Have fun with your new set up...

 

[cyklon_300]

my Halcyon 36 wing came with a 22" LP hose...