Hollis F2 sizing???

[adamp69]

can anyone help me out with the sizing for the F2s. i'm ordering a pair to use as travel fins with a size 11, 3mm short wetsuit boot. talked to a couple shops, and they have differing opinions on the size i will need. unfortunately, trying a pair on isn't an option. any experience with these fins and pocket size would be helpful

 

[Charles2]

Let me Google that for you!

F2

Look under the 'SPECS' tab

 

[adamp69]

thanks man, but i've looked at the specs. i've looked everywhere and talked to a couple shops. and it all depends on the boot obviously. i was just hoping someone with personal experience with these fins could tell if the XL is going to be way too big for a wetsuit boot, or if the REG is too small for a size 11. Again, i plan on using these in only warm water with a light weight boot

 

[decompression]

I have a set of xl F2's, I have a size 12 foot. With 3mm wet boots they fit just fine, the springs are adjustable and I've moved one side of the spring tighter. So, the xl's would seem to be ok for you. Also, because of this adjustment, the Reg would probably work as well. The XL will work with my Drysuit boots as well with the adjustment. Hope this helps.


Sent from my iPhone using Tapatalk

 

[adamp69]

thanks. My XXL jet fins are a little sloppy with my 6 mm wetsuit boots. so i can only imagine what they'd be like with 3mm boots. i do have kind of a wide foot with a high arch. so i'm kind of leaning towards the XL. but i don't want them to be sloppy

 

[decompression]

In that case I'd go with the xl's, the adjustments should make it fit fine.


Sent from my iPhone using Tapatalk

 

[Dive Right In Scuba 2]

thanks. My XXL jet fins are a little sloppy with my 6 mm wetsuit boots. so i can only imagine what they'd be like with 3mm boots. i do have kind of a wide foot with a high arch. so i'm kind of leaning towards the XL. but i don't want them to be sloppy

Based on you saying that you have a wide foot...it makes me lean towards recommending an XL for you.