Help identifying drysuit glove system...

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Hvilsom

New
Messages
4
Reaction score
0
Location
Denmark
# of dives
0 - 24
Hey
My thrusty old Waterproof D1 Hybrid (red lining) need new o-ring in the gloveseals - but I dont know what system that is on...

Can anyone help med identify? The inner o-ring is 93/5mm - so it is not the Ultima, or could it be a old one?

Anyone???


Thanks in advance :)
/Anders

IMG20250308095624.jpg
9641c8fa-e393-4ae0-94e9-7bb26afcf80e.jpg
cc319916-6975-483e-92c4-cc83a7b3620f.jpg
IMG20250308095611.jpg
IMG20250308095620.jpg
 
Your rings look to be the Waterproof Ultima DGS, but there is a small chance they could be the Diving Concept dryglove ring system. Diving Concept rings were the original patent that Waterproof bought and slightly modified when they created the Ultima DGS. I think the modification was a slight change in size of the rings. The fact that you have black o-rings as the glove-ring seal instead of red/orange, might be an indicator you have the older Diving Concept rings.

I believe MaxBottomtime used the Diving Concept rings at one point...perhaps he can chime in.

If your rings are Ultima DGS, here is a source for the o-ring(s) you need:

If your rings are Diving Concept, then you will have to measure and guestimate the hardness/shore of the o-ring and try to find a suitable substitute.

-Z
 

Back
Top Bottom