I was getting fills for my PST E7-120 and new Worthington X7-120, and noticed, standing side by side, that the PST looks to be at least one inch taller than the Worthington. Same boot on each. Are the walls thinner in the Worthington?
Height of PST vs. Worthington
- Thread starter mark99
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
dessaler
Registered
specs pst
for worthington specs
for worthington specs
OP
Thanks for putting the specs together. But the tanks are not the same overall height, or the same shape at the neck area. The PST tank is overall about 1/2 inch taller, and the neck on the Worthington tank is taller. That makes the "body" part of the tank about 1 inch shorter in the Worthington. So if both tanks are the same diameter, and they are the same capacity, then the walls must not be the same thickness. Right?
Similar threads
