Haskells Serviced?

[Superlyte27]

I think it was about $1800 to rebuild and prep for oxygen service. (Parts and labor)

and if i did it myself?

 

[rigdiver]

Let Perry do it at HPT. You will be happy, not sorry.
He did my Gas Transfer System and it sings now.
Bill

 

[dannobee]

and if i did it myself?

Half that price

 

[Jimmer]

Are you mechanically inclined at all?

There's really not much to Haskel's. The engineering drawings from Haskel will have the part numbers of seal kits and their location in the booster.

You can get the parts or the booster serviced at American Airworks - High pressure breathing air equipment.

Where would one get the engineering drawings for a Haskel?

 

[dannobee]

Where would one get the engineering drawings for a Haskel?

Either through Haskel or FLW.

You'll need to know to know the SN and model number off of the label.

They'll email them in a PDF format.

 

[Jimbo2]

Actually, I called them, and several weeks/several phone calls later, they still couldn't be bothered to call me back.

Dear Superlyte27:

My sincere apologies that your Haskel booster inquiry wasn't handled promptly or apparently not at all. Most sales/service inquiries, via email, are directed to me. So I'm probably to blame, depending upon method of contacting us you used. We offer email, fax and an 800 number (800-523-7222) to make contact with us.

We service/rebuild a lot of Haskel boosters, those we buy used to resale and from owners of Haskels. We've been doing this for about 20+ years now. We do about $5,000,000 in sales and service annually. Try as we do, we will not meet all the expectations of all the people who contact us, all the time. However, we do try to.

We currently have about 10 units to overhaul, including three from the military. We have rebuilt units on our web site to purchase. We are not the cheapest source for Haskel boosters but we are very dedicated to providing a dependable unit to our Haskel booster buyers.

If I can be of any future assistance, please call or email me.

God bless and safe diving...........ray@americanairworks.com (NAUI 5939 retired)

 

[frogman62]

Ray Lambert at Americanairworks has always been readily available and quick to respond to all my inquiries and orders
Jim Shelden

 

[webedivin2000]

We just contacted Airworks about one of our two haskel pumps. They returned our call immediately and after conversation it it turns out it is less expensive to have them rebuilt it than what it might cost us if we order the parts and do it ourselves.
We are shipping ours out this week for total sevice. Good luck !!!!

Ray Lambert at Americanairworks has always been readily available and quick to respond to all my inquiries and orders
Jim Shelden

 

[Wookie]

I've always done my own military surplus Haskels, but if you are at all concerned, I would send it off to Ray. There is a learning curve to doing it, while not steep, can be expensive (I broke the plunger cup because I did step 14a before step 13c. I didn't really think it would matter. It does. They are set up to do it, and you know it will come back right.