Free flow mania!

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Most regulator manufacturers say their non-cold water regulators are good to 50 degrees F. Below that temp. a regulator can freeze up and free flow.
 
84CJ7:
Theres always the garden hose trick btw, just fold the damn hose over and hold it kinked, never actually tried it, but id imagine it would work until the situation could be sorted out

That assumes a correct diagnosis of a second stage problem. If you're wrong and the 1st stage is free flowing then you'll have anak pressure in an IP hose intended for <200 PSI and a catastrophic blowout is llikely.

Pete
 
We see free flows a lot in 40 degree water in MN. I've never had the experience, but last weekend while diving in fairly cold water one of the divers with us had it happen on two different regs while at depth and in cold water. We usually detune the reg most of the way (makes it so it's a little harder to draw air, but isn't really noticable to you) and then pull back the hose protectors a little bit from the 1st stage. Seems to really help.
 

Back
Top Bottom