Fitting SiTech rings on Hollis FX100

[Tbar]

Hi

I am planning to fit SiTech oval rings to my Hollis FX100 dry suit. I have done this to a whites Fusion suit so have some experience, I used heat tape glue.

Given that the Hollis is a different material, I understand it has a 'flexible' polyurethane liner, are there considerations or restrictions on the glue I can use? Is there an increased risk in applying heat to the Hollis material.

Thanks

 

[ajduplessis]

Ask Mike @ DRIS

 

[Doby45]

Dive Right in Scuba

 

[Tbar]

I did ask DRIS as that is where I have purchased the parts in the past.

For others who may have this question, here is the answer:

"the install will be the same. You will just need to use the heat tape and it will work the same as on your Fusion."

Thank you DRIS for the information.

 

[Dive Right In Scuba 2]

I did ask DRIS as that is where I have purchased the parts in the past.

For others who may have this question, here is the answer:

"the install will be the same. You will just need to use the heat tape and it will work the same as on your Fusion."

Thank you DRIS for the information.

Glad we were able to help you out! The dry heat tape is pretty versatile. If you need anything else just give us a shout!