• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Eddy Fin Strap Bolt Material

Discussion in 'Deep 6 Outfitters' started by MARK1992, Apr 5, 2019.

  1. MARK1992

    MARK1992 Angel Fish

    41
    4
    8
    There's some whitish green corrosion happening on the bolts holding the fin strap on. Safe to use a steel brush bit on a rotary tool to get rid of it?
     
  2. Candiru

    Candiru Manta Ray

    823
    126
    43
    I would put Vinegar and water 50/50 in a sealable container and soak and shake the part then remove any left over verdegris with a nylon brush.
     
  3. wbatten1

    wbatten1 NAUI Instructor

    # of Dives: 1,000 - 2,499
    Location: San Antonio, TX
    85
    94
    18
    An old toothbrush and a little bit of white cooking vinegar will work wonders. A steel brush on a rotary tool is a little overkill.

    Best,
    Bill
     
  4. MARK1992

    MARK1992 Angel Fish

    41
    4
    8
    Thanks guys, will do so. Appreciate the advice.
     

Share This Page