DACOR PACER Manual

[Texfrazer]

I believe that this one is covered by the manual that can be found here - at least the front picture looks suspiciously similar!

 

[knotical]

That's it. That manual is from 1980, while mine is from 1993. The older manual gave me info on the 150 first stage that is not in my later manual. Thank you.

 

[shogan]

Wow that 1st stage looks simple enough to maintain. As well as the 2nd.

And it appears for the most part a couple of orings and 1 seat per stage are the only thing that would typically be replaced. No reason mares did not continue to supply those.

Thank you both for the information!

 

[Texfrazer]

My pleasure!

knotical, do you happen to have any info on the 960 first stage?

 

[knotical]

knotical, do you happen to have any info on the 960 first stage?

I do. There are two versions, "pre 1991" and "1991 and after". But the difference appears to be internal; so unless you're certain which you have I'd scan both. If you PM me an email address I can send them to you. And please be patient, I'm on a brief break from stuff much less important than scuba - i.e. work.

 

[tpcook]

Please E-Mail (tpcook@videoautomation.com) a copy of the Dacor Pacer 2nd stage manual

Thanks

 

[knotical]

Please E-Mail a copy of the Dacor Pacer 2nd stage manual

Thanks

If you can narrow down which Pacer 2nd stage you need (see post #2 in this thread), I can probably help.

And were I you, I'd probably have sent your email address by PM instead of posting it here in a public forum. It might not be too late to hit "edit" and remove it. Then click on my name and send a PM noting which of the ten Pacer second stages you have.