converting Onyx from yoke to din....
- Thread starter Rich52
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
claymore
Contributor
I believe the Yoke to DIN Conversion Kit by Zeagle Part Number 345-1010 Your Cost $53.75 From Zeagle Express will work. Best bet is to call or go to Zeagle Express. The Zeagle plant is right near there also. It is not difficult. You will need a way to secure 1st stage (3/8" fine thread bolt 4" - 6" long a 3/8" national fine nut and a vise to put the bolt in works in a pinch. Bolt threads into LP port nut threads up to regulator to hold it in place and bolt gets locked int the vice. Be gentle with everything, regs are made of brass which is soft metal) the large adjustable wrench to remove the yoke nut and I believe a 1/4" allen wrench to install the DIN fitting. it is recommended that the Din Fitting be Torqued to the proper specs with a torque wrench.
Similar threads
