converting Oceanic DX4 regs from yoke to din

[CldWaterDvr]

Hi all,

I have a question about converting Oceanic regs from yoke to din.
My girlfriend is using an Oceanic DX4 with a yoke valve on it.
I would like to be able to use this with some of my HP tanks.
Anyone ever have any problems with a DX4 on an HP tanks? I think that it should be just fine, but I thought I would ask.
I’m trying to convert it over to din. Looks like there are 2 kits available from Oceanic.
The kit that I ordered is the 40.4026 that came with the saddle and dust cap. I believe that I needed the other kit 40.4026.99. This is the question is this the same kit just without the saddle, and dust cap? Can you install the valve just without the saddle?
I haven’t tried this yet I thought I would pick some brains first
Thanks in advance..

 

[rescuediver009]

I am not sure about the kits just by the part numbers but if you look at the yoke itself, stamped on the side is "3500 psi" which is good for your hp tanks....

 

[Scottri]

Should be a pretty easy conversion. There won't be a problem with the DX4 on an HP tank.

 

[CldWaterDvr]

Thanks for all of your input