Converting my AL Legend from yoke to DIN

[Codyjp]

what do i need to get to convert my Aqualung Legend from a Yoke to a DIN. I already have a tank that is DIN.

Can you help me out!!?!?!?!

 

[Dive-aholic]

You just need the DIN adaptor. Once you have that, unscrew the yoke from the 1st stage and screw the DIN adaptor in. Contact your local AL dealer to oder the adaptor.

 

[Codyjp]

cool, i was looking around online but not having much luck which would make since considering it is AL.

 

[jiveturkey]

The din adapter is different than the "conversion kit". You can also get a kit that will permanently change your yoke reg to a din. I'm pretty sure it has to be done by a technician though.

 

[Scottri]

Doing the swap is not hard at all. It's not "permanent" it's pretty quick to change back to yoke.

 

[Luis H]

Is this what you are looking for?

AquaLung 300 Bar Din Conversion Kit for Legend ACD Regulators:
http://www.leisurepro.com/Prod/Cate...k/DescSort_0/Filter_6=526/UDRDAKLA.html?Hit=1


It is kind of pricey at $100, but it may be because of the ACD unit.

Good luck

 

[jiveturkey]

Doing the swap is not hard at all. It's not "permanent" it's pretty quick to change back to yoke.

Really? That's good to hear. I just ordered a conversion kit.

 

[Codyjp]

thanks for the help guys. How much skill does it take to put this thing on?

Thanks for all of your help. I looked for this online but i had no luck.

 

[Dive-aholic]

The hardest part is getting the yoke off. They locktite it at the factory and it can be a &$*% to get off. I bought my Legends as DINs, but I converted some Zeagle regs to DIN. Those yokes seemed like they were superglued on!

 

[xSandman3]

Take it slow, and note o-ring placement, etc. I change my Apeks back and forth a few times every month. Only time I ever screwed it up was when I had an o-ring not seated right, and cut it in half when I tightened it up.