Larry Widhelm
Registered
Looking for the adj plug that goes on the left side of a Conshelf second stage. P/N 100324. Any help would be appreciated.
Conshelf 2nd stage part
- Thread starter Larry Widhelm
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
runsongas
Contributor
OP
Larry Widhelm
Registered
Thank you
Larry, I bought one from Vintage Double Hose, and it works well.
SeaRat
SeaRat
OP
Larry Widhelm
Registered
Thank you. Didn't find one on their parts page. Any place else I can look?
runsongas
Contributor
did you try LDS that are aqualung dealers? what is wrong with the one bryan linked?
Both John's and Bryan's links work. The plug I designed for Bryan looks ....well is.... different. There were 2 versions of the plug, one that fit internal to the reg and the other that was larger and held on a locking keeper for the faceplate of the reg. This plug will replace both but looks different than either one of them. It's thicker for more strength and to accommodate a larger tightening slot. It will replace both without the need for producing 2 different ones. Original replacements are not available from AL which is why VDH decided to make them.
Similar threads
