Compressors - last two

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

frogman62

Contributor
Messages
431
Reaction score
54
Location
Wichita KS
I have 4 compressors that you might consider
1. a new build fully functional (for breathing air quality) 4.2 CFM to 5000PSI Kidde at $2500 plus shipping.
2. A rebuilt 4.2 Kidde for breathing air or airguns using military moisture trap and used (good) filter for $1800 plus shipping.These will fill an 80 Dive cylinder from 0 PSI to 33000PSI in 21 minutes -
3. Two 6.0 CFM Noah Howden compressors complete with a commercial combination moisture trap and filter for breathing air (Grade E). Powered by a Baldor 5 HP 220 volt industrial motor with manual controls (electric shutoff/start and moisture drains). Unit will be either direct drive (as shown) or belt driven similar to bE4.2
The 6 CFM will fill an 80 in less than 15 minutes or a great white for air guns 3000PSi to 4500PSi in less than 6 minutes. All are continuous duty
See my web site sheldensportinggoods.com or call 316-992-0505
Builder of HP compressors for Airgun, Paintball and SCUBA
 
Do have any K tanks for sale?
Capt. Bob,
Sorry I don't have any "k" tanks available. Contact Kevin Call (Breathing Air Services) Phone 316-706-8571 in Augusta KS
Jim Shelden
 
I have 4 compressors that you might consider
1. a new build fully functional (for breathing air quality) 4.2 CFM to 5000PSI Kidde at $2500 plus shipping.
2. A rebuilt 4.2 Kidde for breathing air or airguns using military moisture trap and used (good) filter for $1800 plus shipping.These will fill an 80 Dive cylinder from 0 PSI to 33000PSI in 21 minutes -
3. Two 6.0 CFM Noah Howden compressors complete with a commercial combination moisture trap and filter for breathing air (Grade E). Powered by a Baldor 5 HP 220 volt industrial motor with manual controls (electric shutoff/start and moisture drains). Unit will be either direct drive (as shown) or belt driven similar to bE4.2
The 6 CFM will fill an 80 in less than 15 minutes or a great white for air guns 3000PSi to 4500PSi in less than 6 minutes. All are continuous duty
See my web site sheldensportinggoods.com or call 316-992-0505
Builder of HP compressors for Airgun, Paintball and SCUBA
Good day,

What do you have left for compressors? im looking for one for my self and budget is a bit tight and all..
 
https://www.shearwater.com/products/teric/

Back
Top Bottom