check my logic?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

limeyx:
Yes, absolutely it has enough gas, as does an AL40 of 50%
And the general rule is if you need more deco gas, take 2 gases (50% and 100%) rather than a big bottle of one (this helps with lost deco bottle scenario and reduving rock bottom etc.)

With my deco SAC of 0.6 SCFM, I need 33 cubes of 50 to run that profile according to v-planner. I'd like a little more gas for contingency. Since I don't have a LP45, I'm stuck using an 80 which really isn't too bad and it will help get me used to it for when I start diving stages. I haven't started doing the types of dives where bringing another deco mix is really worth the added complexity.
 
loosebits:
With my deco SAC of 0.6 SCFM, I need 33 cubes of 50 to run that profile according to v-planner. I'd like a little more gas for contingency. Since I don't have a LP45, I'm stuck using an 80 which really isn't too bad and it will help get me used to it for when I start diving stages. I haven't started doing the types of dives where bringing another deco mix is really worth the added complexity.

I've lost the deco profile now. Generally I assume SAC 0.5 on deco, and that I can get 30 mins on an AL40 of 50% starting at 70 feet.

If I fall a little short on the 10 foot stop, then I can just go to back gas.
 
https://xf2.scubaboard.com/community/forums/cave-diving.45/

Back
Top Bottom