Carbon Fiber Backplates?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I'd be surprised if they did prepreg for the production parts. Parts in the aftermarket automotive industry are very rarely done in prepreg and they're done in much higher volumes. With a niche product like a backplate, I can't see a company justifying the extra costs.

An aluminum insert in between the layers probably is what they're doing, but it's a horrible idea. Carbon and aluminum in a saltwater environment is a recipe for lots of galvanic corrosion. Titanium is the right material for the job, but again with the extra costs and being a niche product.
 
Go gold and show that you have bling

  • GOLD backplate
005155-E3-FD90-409-C-A4-CC-D68-E4-A377-FCC.jpg


  • GOLD primary torch
D450-DC4-E-66-AB-4011-9-DCE-5-E74-ED7-F2-A94.jpg


When you think diving equipment needs more bling :)
 
Gold is old. A Louis Vuitton wrap would be better, with a Gucci wing.
 
All thank you for your insights and some very strong opinions. Even know the CF plate I’m looking at is only €9 I think I will stick with something that has a long and reputable history. I think I will start looking for a good travel rig in aluminum. Thanks again for all your inputs.

Respectfully
Woody

This is also an option worth considering. Dolphin Tech by IST HHBP-III Commercial Diving Harness A commercial diving harness that is light weight and has been in service in the commercial diving industry for decades. This meets or exceeds the standards of every agency the regulates commercial diving worldwide.
 
Even know the CF plate I’m looking at is only €9 I think I will stick with something that has a long and reputable history.

The raw carbon fiber for a backplate, ignoring any resin used, is going to cost at least twice that. (Assuming 1.5 sq ft of cloth used, per ply, and 10 plies used for a backplate that's a bit under 1/8" thick with cloth at $19 per running yard of 50" wide 5.7oz 2x2 twill from a commercial supplier when buying an entire roll)
 
Gold is old. A Louis Vuitton wrap would be better, with a Gucci wing.

While I applaud your proposal for a Gucci wing, the outfit would not be complete without some Salvatore Ferragamo rock boots.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom