- Messages
- 18
- Reaction score
- 0
Hey All,
After a lot of work I decided on the C5060 in an Ikelite housing with dual DS125s and dual TTL sync cord. I'm struggling a bit with the set up however. Ike's suggested settings (M, f5.6,1/100s, ext flash, Slow1)
My issues are two: 1)I cannot seem to turn off the internal flash. I set the flash to External (not external + internal) and Slow1. The ttl connector is in the C5060 hot shoe but the internal flash still fires. Only way to stop it is to turn it off but then Slow1 cannot be selected.
The above may relate to problemn 2)
While the TTL works well at close range, I cannot make the strobes fire at full intensity. For example I set app. to f8 1/100s and took pictures in one foot increments, moving back from subject. Instead of flash power being increased, the image brightness strats to drop off at 5 feet and is pretty dark by six feet. If the flashes are then set to Full Power, the image is washed out, indicating that there is plenty of power avaiable, but the TTL is not calling for it.
Any suggestions?
After a lot of work I decided on the C5060 in an Ikelite housing with dual DS125s and dual TTL sync cord. I'm struggling a bit with the set up however. Ike's suggested settings (M, f5.6,1/100s, ext flash, Slow1)
My issues are two: 1)I cannot seem to turn off the internal flash. I set the flash to External (not external + internal) and Slow1. The ttl connector is in the C5060 hot shoe but the internal flash still fires. Only way to stop it is to turn it off but then Slow1 cannot be selected.
The above may relate to problemn 2)
While the TTL works well at close range, I cannot make the strobes fire at full intensity. For example I set app. to f8 1/100s and took pictures in one foot increments, moving back from subject. Instead of flash power being increased, the image brightness strats to drop off at 5 feet and is pretty dark by six feet. If the flashes are then set to Full Power, the image is washed out, indicating that there is plenty of power avaiable, but the TTL is not calling for it.
Any suggestions?