frogman62
Contributor
Over the last months, two of us purchased 132 of the surplus Bristol compressors. This is the best compressor Bristol manufactured (4S7-70) It has not been built for 15 years. We are going to manufacture spare parts for them and sell them with 1 year full guarantees, primarily to the compressed natural gas community. Description is listed below with pictures:
Bristol 4S7-70 These compressors are rated at 5 CFM,
6000PSI. They are configured for breathing air
(grade E / Scuba), HP Air guns, Paintball, and CNG
(Compressed natural gas). I have over 100 of these
units for sale and plenty of spare parts. They have
been cleaned, refurbished and tested to factory
specifications. Dimensions are - 28 in.tall,
24 in.wide and 20 in.deep and weigh approx. 270
pounds depending on motor and filter configuration.
These units are fully automatic, HP shutdown (set
to customer pressure requirements) and auto
moisture drain included in each configuration.
CNG OPTIONS include 3600PSI combination moisture
trap/filter with a CNG approved fill line. No
connectors are available to connect to the customers
CNG system Price for:
5HP, 3 phase motor, 220 volts is $3800 plus shipping
5HP, 1 phase motor, 220 volts is $4200 plus shipping
The CNG configuration must be located in an open
building and is not intended for commercial filling
operations in a closed location.
AIR OPTIONS include 5000PSI commercial moisture
trap and filter, delivering Grade E or better
breathing air, Unit can be used with a nitrox stick.
Filling whip is included with either a SCUBA yoke
or DIN connector.
Price for:
5 HP, 3 phase motor, 220 volts is $4350 plus shipping
5 HP, 1 phase motor, 220 volts is $4750 plus shipping
(NOTE:Manual controlled compressor units are priced
@ $400 less than prices listed above)
Jim Shelden
sheldensportinggoods.com
Bristol 4S7-70 These compressors are rated at 5 CFM,
6000PSI. They are configured for breathing air
(grade E / Scuba), HP Air guns, Paintball, and CNG
(Compressed natural gas). I have over 100 of these
units for sale and plenty of spare parts. They have
been cleaned, refurbished and tested to factory
specifications. Dimensions are - 28 in.tall,
24 in.wide and 20 in.deep and weigh approx. 270
pounds depending on motor and filter configuration.
These units are fully automatic, HP shutdown (set
to customer pressure requirements) and auto
moisture drain included in each configuration.
CNG OPTIONS include 3600PSI combination moisture
trap/filter with a CNG approved fill line. No
connectors are available to connect to the customers
CNG system Price for:
5HP, 3 phase motor, 220 volts is $3800 plus shipping
5HP, 1 phase motor, 220 volts is $4200 plus shipping
The CNG configuration must be located in an open
building and is not intended for commercial filling
operations in a closed location.
AIR OPTIONS include 5000PSI commercial moisture
trap and filter, delivering Grade E or better
breathing air, Unit can be used with a nitrox stick.
Filling whip is included with either a SCUBA yoke
or DIN connector.
Price for:
5 HP, 3 phase motor, 220 volts is $4350 plus shipping
5 HP, 1 phase motor, 220 volts is $4750 plus shipping
(NOTE:Manual controlled compressor units are priced
@ $400 less than prices listed above)
Jim Shelden
sheldensportinggoods.com
Attachments
Last edited:
