Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
DSS has a part for that purpose...Don't know if it can be used on bp's other than their own....
Glide Harness Adapter w 2 1/4 x 20 x 3/8 BHA & 2 nuts Permits On the Fly adjustment of single piece Hogarthian Harnesses. The DSS Glide Harness Adapter Bolts onto any DSS Stainless Steel Back plate. Compatible with DSS bolt on weight plates (with optional 1/4 x 20 x 1/2 Button Head Allen fasteners Click Here ) Requires no drilling, Mounts or removes in Seconds Simple all stainless steel construction. No bolt extenders required when using doubles. Can be used on right or left side of the back plate. Adjustment requires substantial effort, unintentional harness slippage is avoided. Not compatible with DSS Kydex back plates or with any other brand of back plates. Mounting requires holes that are only present in DSS Stainless Steel Plates. Works best with slightly softer harness webbing. DSS Hogarthian Harnesses sold starting April 2010 includes this slightly softer webbing. If your harness was purchased prior to April 2010 it is recommended that the harness webbing be replaced. DSS offers a package deal that includes one adpater and 12 ft of new replacement webbing. Click Here" |
this looks to be a very logical way to go, who has them in the US or Canada?
I have a set of the rollers, they were made by someone in NC and sold at Olympus Dive Center
Olympus is where I started looking, they can't get them any more, but I think I will send off to the UK and get a set of the Agir Harpa
I can't view the site with firefox, what is the damage on the stuff from the UK?
Stainless Steel Footman Loop
Stainless Steel Loops
I think this may work. I used a SS Rectangular ring and made my own, for the first BP/w that I owned before even using it one time. It is such an obvious modification, I was amazed that it was not common... then Halcyon started doing it too not too long ago.
I used these D-Rings, doubled up and then used a piece of fuel line hose to resure the ends of the ring behind the back plated