Battery Question

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

WOW!

So my camera crapped out at about 1.5 hours...but the LCD is still going strong after 3.25 hours!

Only problem I had is I couldn't get them to charge in the holder on the universal charger as I had hoped. The charger senses the correct voltage, but just doesn't seem to start chaging the pack.

Tech support said it could be due to some of those wierdisms you run into with new NiMH batteries, and recommended that I just leave them in over night.
 
grunzster:
The MAHA does have a little magnet that goes on the batery pack to sense the temperature though, and I believe adjusts the charge depending on the temp.

CRAP!

building a costom pack costs $10. that includes the shrink tube, solding and wire leads with a plug. You can have a 10 battery pack made up that will supply the full 12V
A custom pack is cost effective with a radio shake batty holder.

Look here http://www.batterystation.com/
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom