Atomic T2 second stage to standard hose

[Kenneth Strömberg]

Anyone know where I can find a part to connect a normal hose to a T2 second stage?

I want standard hoses (with different hose lengths) and I do not want the Atomic swivel.

Going to connect a standard long hose directly between 1st & second stage, a short hose with 90 degree bend for my necklaces reg.

 

[inquis]

Atomic Aquatics Jam Nut, Brass

Used to remove the swivel on Atomic regulators so that a standard 9/16" hose can be used.

scubadelphia.com

 

[Scared Silly]

You have taken apart the comfort swivel hose. You need to remove the other half that is still attached to the inlet tube on the second stage. Easily done with an adjustable wrench on the flats.

Once that is removed you still need to remove the o-ring that is on the inlet tube.

Then as @inquis notes you put a jam nut on the inlet tube. Finally the normal hose.

 

[Geo7]

Not much to add, except a hopefully helpful schematic.

The hidden o-ring is really important if you use the Atomic swivel. It's not like Scubapro's application of o-rings under the jam nuts.