cardog
Contributor
I bought the strap a couple of months ago and have logged 17 dives with it on my bc. When I go to loosen the screw to remove my bc from the tank, the spring does not release. any suggestions???
Apollo tank strap
- Thread starter cardog
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Cardog: The bio-tank lock should be rinsed with fresh water to remove salt build up etc. A suggestion would be to soak your tank lock in warm tap water and see if that helps. The tank locks provide 10x the tension of a normal cam band. There should always be a 3/8-1/2" gap when the lock is tight on the tank. This allows for expansion and contraction and helps prevent lock up. If you still have a problem give us a call any week day @ 800.231.0909. The bio-tank lock manual is available at:
www.apollosportsusa.com/Products/Accessories/Tank_Lock.htm
www.apollosportsusa.com/Products/Accessories/Tank_Lock.htm
iscuba
Guest
I always rinse my bc in hot water after a dive. I DO NOT however have a 1/2 " gap when tightened. Both buckles almost touch.
Thanks for the quick reply!
-Ron
Thanks for the quick reply!
-Ron
Similar threads
