Anybody making 30 to 60 thousand lumen dive lights? Besides Big Blue??

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I just checked the specs for the Bigblue CB60000P.
It employs two battery packs mod. Batcell60000.
Each of them is equipped with 8 cells, mod. Samsung INR21700 or equivalent.
These cells are rated at 4.75 Ah at 3.6V.
Hence the total amount of energy stored is:
4.75x3.6x16=273.6 Wh.
It is a lot...
However the lamp is rated to last 1.5h at max power. Hence the available electrical power available for feeding the array of COB LED chips is: 273.6/1.5=182W.
Even assuming high efficiency chips, there is no way this lamp can produce more than 20000 lumen. Instead it is rated, very optimistically, at 60000 lumens.
Energy does not lie...
 
@calabash digger big blue does not make lights that can output 30k or 60k lumens. They may claim they do, however it is not possible with the batteries they are using. @Angelo Farina posted some information. Every light that BB makes should have their lumen rating cut in half at best for their actual outputs.
For blackwater diving, the total lumen output isn't going to allow you to see any better, particulate is particulate...
 
Yeah so that’s less than 10,000lumens total and even fewer a few minutes after they’ve been turned on. I’m not sure how the Keldan actually tests but at least their math in wH makes slightly more sense. Light and Motion is pretty accurate but at loss of burn time.
So basically Big Blue is ripping me off?? I have two 10,000 lumen lights tethered together...so it should be 20,000 and your saying it is not even close to that...
 
I have tried a 4800 lumen 10 degree beam from big blue but according to yhall it really was more like 2400.... it was not enough...
 
That just :rant: me off....that they are lying that much about their lumen output..
Yeah wait until you hear how much of that “10,000” lumen is actually being output after they’ve been on for an hour.

I still think in your use case a Halcyon Focus or Flare or a 21W,35W HID would be more useful in that particulate.
 
I know they get weaker at the end of my dive...my friends are all using the old halogen lights and I have been the test monkey on the LED lights....I wish I could find a company to test lights for here in this dark water without having to spend thousands of dollars to figure all this crap out..
 
Whats the purpose for such a powerful lighting rig? At that level you're going to need something set up for the specific job.

Maybe you're planning some special task like illuminating a whole cave or shooting high-speed video, but for most general purposes more light doesn't necessarily equal more better after a few thousand lumens.

And yeah, BigBlue is a Chinese company (with slicker than usual branding) that misrepresents specs to sell more lights to novices. Their product is "OK" but not great. Very different from high end light builders like Under Water Light Dude or Light Monkey.
 

Back
Top Bottom